(DIS-200G-12PSW) D-LINK 8pt PoE 2pt GB 2pt GB SFP PB 130W, SKU DIS-200G-12PSW

Included Accessories DIN-rail mounting kit, wall mounting kit
Cables Included 1 x console cable
Compliant Standards UL, C-Tick, BSMI, IEC 61000-4-5, FCC, IP30
Width 8.3 in
Depth 6.7 in
Height 1.9 in
Min Operating Temperature -40 °F
Max Operating Temperature 167 °F
Humidity Range Operating 0 – 95% (non-condensing)
Min Storage Temperature -40 °F
Max Storage Temperature 185 °F
Humidity Range Storage 0 – 95% (non-condensing)
Device Type Switch – 10 ports – smart
Enclosure Type DIN rail mountable, wall-mountable
Subtype Gigabit Ethernet
Ports 10 x 10/100/1000 + 2 x SFP
Performance Switching capacity: 24 Gbps ¦ Throughput (64-byte packet size): 17.85 Mpps
MAC Address Table Size 8K entries
Jumbo Frame Support 9216 bytes
Routing Protocol IGMPv2, IGMP, IGMPv3, MLDv2, MLD
Remote Management Protocol Telnet, CLI
Encryption Algorithm SSL
Authentication Method RADIUS
Features Flow control, ARP support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, store and forward, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Dying Gasp support, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), MLD snooping, Safeguard Engine, reset button, Cable Diagnostics Function, IPv4 support, fanless, LLDP support, Link Aggregation Control Protocol (LACP), Port Security, SNMP trap, DHCP client, 512KB packet buffer, Dynamic VLAN Support (GVRP), dual firmware images, Strict Priority (SP), tagged VLAN, TFTP client, 802.1x authentication, Ethernet Ring Protection Switching (ERPS), Digital Diagnostics Monitoring (DDM), Authentication, Authorization and Accounting (AAA), Web-based Access Control (WAC), Energy-Efficient Ethernet (EEE), Weighted Round Robin (WRR), Head-of-line (HOL) Blocking Prevention, loopback detection
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az
RAM 128 MB
Flash Memory 32 MB
Status Indicators Status
Interfaces 10 x 1000Base-T RJ-45 ¦ 2 x 1000Base-X SFP ¦ 1 x console RJ-45
Voltage Required AC 120/230 V / DC 46 – 54 V (50/60 Hz)
Software Included Drivers & Utilities
Warranty 3 Years