Control 88M 120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer

Frequency Response (-10dB): 47 Hz – 16 kHznPower Rating: 240 W Continuous Program (2 hrs) | 120W (480W peak), Continuous Pink Noise (2 hrs) | 100W (400W peak) Continuous Pink Noise (100 hrs)nTransformer Taps: 70V — 60W, 30W, 15W & 7.5W | 100V — 60W, 30W, 15WnFrequency Response (±3 dB): 60Hz – 15 kHznMaximum Input Voltage: 28.0 VnSensitivity: 87 dB, 1W @ 1m (ave. 80Hz – 16kHz)nNominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).nDirectivity (Q): 2.1nDirectivity Index (DI): 3.2 dBnRated Maximum SPL: 108 dB @ 1mnNominal Impedance: 8Ω (at 8Ω setting)nMinimum Impedance: 6.6Ω at 9.5kHznInsertion Loss: <0.5 dB at any tap settingnThru Setting: 8Ω nominalnCrossover Type: 2nd Order LPF on LF and 2nd Order HPF on HFnRecommended Protective High-Pass: 45 Hz for 8Ω operation, 24 dB/oct | 80 Hz for 60W tap, 24 dB/oct | 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/octnLow Frequency Driver: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.nHigh Frequency: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.nEnclosure Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.nGrille: Powder coated stainless steel.nEnvironmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.nAgency Ratings: UL1480, Transformer UL Recognized per UL1876, ROHS compliant.nTerminals: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)nWiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).nColors: Hunter Green, RAL6018nDimensions (H x W x D): 524 x 355 x 355 mm (20.7 x 14 x 14 in.)nNet Weight: 7.8 kg (17 lb)nShipping Weight: 10.5 kg (23 lb)nIncluded Accessories: (2) wire nuts, (2) gland nuts, (1) right-angle screwdrivernInstaller-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure. [block id="short-description-product"]